20041124-allegro-06-websganged:
For the mid-panels, we'll be using webs #6-10, and there are a total of 4 a piece for each number. You'll be "ganging" two together to make the width of the spar. I used some medium CA, and made my best effort to get the nice and square to each other.
NOTE: It may not look like it, but these webs are TAPERED!!! Use a set of calipers to find out which ends are the fat ones. On average, the difference between high and low sides on my webs was 0.01, barely noticeable to the eye.
20041124-allegro-06-websganged:
For the mid-panels, we'll be using webs #6-10, and there are a total of 4 a piece for each number. You'll be "ganging" two together to make the width of the spar. I used some medium CA, and made my best effort to get the nice and square to each other.
NOTE: It may not look like it, but these webs are TAPERED!!! Use a set of calipers to find out which ends are the fat ones. On average, the difference between high and low sides on my webs was 0.01, barely noticeable to the eye.