20041123-allegro-07-glassingbar:
I sprayed one side of each piece of fiberglass down with 3M-77 spray and then applied each to the underside of the joiner bar assembly, pressing down hard to ensure a good seal with the 77 spray. Then using some good straight thin epoxy, I wetted the fiberglass.
20041123-allegro-07-glassingbar:
I sprayed one side of each piece of fiberglass down with 3M-77 spray and then applied each to the underside of the joiner bar assembly, pressing down hard to ensure a good seal with the 77 spray. Then using some good straight thin epoxy, I wetted the fiberglass.