20041123-allegro-05-sandingbarbottom:
Next, we need to apply the 5 strips of 2oz fiberglass to the bottom of the joiner bar assembly. Sand the bottom of the joiner bar assembly nice and FLAT. The FG is there to prevent a "peel failure" so says Drela. We need good adhesion here.
20041123-allegro-05-sandingbarbottom:
Next, we need to apply the 5 strips of 2oz fiberglass to the bottom of the joiner bar assembly. Sand the bottom of the joiner bar assembly nice and FLAT. The FG is there to prevent a "peel failure" so says Drela. We need good adhesion here.