20041125-allegro-01-joinersflush:
Here I have sanded the end of the joiner bar assembly flush with the plans. Also note I have one of the bars inside it's tube here. I had to do a little sanding on the bar to make it fit into the tube without a whole lot of force. Be careful! The bar/tube fit can go from "too tight" to "too loose" in a matter of seconds when sanding. Sand a little and check.
20041125-allegro-01-joinersflush:
Here I have sanded the end of the joiner bar assembly flush with the plans. Also note I have one of the bars inside it's tube here. I had to do a little sanding on the bar to make it fit into the tube without a whole lot of force. Be careful! The bar/tube fit can go from "too tight" to "too loose" in a matter of seconds when sanding. Sand a little and check.